ProductDesigner

Notes:

Only the print is created in the Designer. No ribbon color can and must be selected here!
The print data must be created in 100% black
grayscales, gradients, transparency, drop shadows are not possible
A font size of 10 pt is recommended (a smaller font size may not be legible)
line thickness at least 0.5 pt (0.18 mm)
Please always create the print file left-justified.
Ye depending on the thickness of the wrist, the print area can otherwise be pasted over

Only the print is created in the Designer. No ribbon color can and must be selected here!
A font size of 10 pt is recommended (A smaller font size may not be readable)
Line thickness at least 0.5 pt (0.18 mm)
Please always create the print file left-aligned.
The print area can be pasted over after the thickness of the wrist otherwise

Only the print is created in the Designer. No ribbon color can and must be selected here!
The print data must be created in 100% black
grayscales, gradients, transparency, drop shadows are not possible
A font size of 10 pt is recommended (a smaller font size may not be legible)
line thickness at least 0.5 pt (0.18 mm)
Please always create the print file left-justified.
Depending on the thickness of the wrist, the print area can otherwise be pasted over

A font size of 10 pt is recommended (a smaller font size may not be readable)
positive line width at least 0.2 mm, negative line width 0.3 mm
Please note that for SVG files the drawing area corresponds to the tape dimensions
Caution: If you create SVG files in Adobe Illustrator using the Export function, they are not valid. Please use the Save option

A font size of 10 pt is recommended (a smaller font size may not be readable)
positive line width at least 0.2 mm, negative line width 0.3 mm
Please note that for SVG files the drawing area corresponds to the tape dimensions
Caution: If you create SVG files in Adobe Illustrator using the Export function, they are not valid. Please use the Save option

A font size of 10 pt is recommended (a smaller font size may not be legible)
positive line thickness at least 0.2 mm, negative line thickness 0.3 mm
Please let us know which numbering you would like to order under Comment
Arial is used by default for numbering. If you wish a different font, this must be made available to us

A font size of 10 pt is recommended (a smaller font size may not be legible)
positive line thickness at least 0.2 mm, negative line thickness 0.3 mm
Please let us know which numbering you would like to order under Comment
Arial is used by default for numbering. If you wish a different font, this must be made available to us

A font size of 10 pt is recommended (a smaller font size may not be readable)
positive line width at least 0.2 mm, negative line width 0.3 mm
Please note that for SVG files the drawing area corresponds to the tape dimensions
Caution: If you create SVG files in Adobe Illustrator using the Export function, they are not valid. Please use the Save option
Please let us know which numbering you want under Comment
Arial is used by default for the numbering. If you wish a different font, this must be made available to us

A font size of 10 pt is recommended (a smaller font size may not be readable)
positive line width at least 0.2 mm, negative line width 0.3 mm
Please note that for SVG files the drawing area corresponds to the tape dimensions
Caution: If you create SVG files in Adobe Illustrator using the Export function, they are not valid. Please use the Save option
Please let us know which numbering you want under Comment
Arial is used by default for the numbering. If you wish a different font, this must be made available to us

Max 8 weaving colors possible
A font size of 10 pt is recommended (A smaller font size may not be readable)
Line thickness at least 0.5 pt (0.18 mm)
Gray levels, gradients, transparency, drop shadows are not possible
colors freely selectable according to Pantone or HKS. Otherwise standard colors are used.

Apply font size with at least 14 pt
Minimum font height 3.6 mm (lower case)
Positive lines with at least 2.5 points (1,0 mm) create
negative lines with at least 3,0 point (1,2 mm)
Please note that for SVG files the drawing area corresponds to the tape dimensions
attention: If you create SVG files in Adobe Illustrator using the Export function, they are not valid. Please use the Save option

to save your SVG files.

Apply font size with at least 14 pt
Apply minimum font height 3.6 mm (lower case)
Apply positive lines with at least 2.5 points (1.0 mm)
negative lines with at least 3.0 points (1,2 mm) Apply
A offset of 1 cm may occur between the outside and inside of the SVG file
Please note that for SVG files the drawing area corresponds to the dimensions of the tape
Please note: If you create SVG files in Adobe Illustrator using the Export function, they are not valid. Please use the Save option

Apply font size with at least 14 pt
Apply minimum font height 3.6 mm (lower case)
Apply positive lines with at least 2.5 points (1.0 mm)
negative lines with at least 3.0 points (1,2 mm) Apply
A offset of 1 cm may occur between the outside and inside of the SVG file
Please note that for SVG files the drawing area corresponds to the dimensions of the tape
Please note: If you create SVG files in Adobe Illustrator using the Export function, they are not valid. Please use the Save option